How to Read BMW CAS3+ ISTAP 32-Digit Engine ISN with Autel IM608
Here comes the problem: I am working on a BMW C6 CAS3++ ISTAP all keys lost. Program is asking for DME ISN and Autel is […]
KEY PROGRAMMING
How to Solve Autel IM508 Subaru Impreza 2019-2021 Not Supported
Problem: I built a 2019 Subaru Impreza wrx US turnkey, lost all keys, tried to use Autel IM508 with the apb112 on an H chip, said […]
Autel IM608 VW Server Maintenance Retry in 999h Solution
Problem: While trying to add key in VW Jetta 2019 under all keys lost situation (when reading immo data), Autel IM608 reports error “Server maintenance in […]
Autel IM608 Program Audi A6 C6 EZS Kessy All Keys Lost
Here is the instruction to Audi A6 C6 4F (2004-2011) EZS kessy All keys lost using Autel MaxiIM IM608 in OBDII mode without removing the […]
Autel IM608 2020 Jeep Wrangler Cannot Read PIN or Learn Key
Situation 1: IM608 won’t read pin nor learn key I was able to read the code of a 2019 Chrysler 300 yesterday with no problems using […]
How to Read Benz W207 EIS Data by Autel IM508 with XP400 Pro
Autel MaxiIM IM508 with XP400 Pro supports the same advanced functions as Autel IM608 and IM608 Pro incl. Mercedes infrared key read/write, remote frequency detection, Benz 3rd […]
Program Benz AKL with Autel IM608 or VVDI MB or CG MB
Have Mercedes Benz with all keys lost (AKL), to program new key using Autel MaxiIM IM608 or VVDI MB or CG MB programmer? Let’s listen to experienced […]
How to Renew and Program Mercedes VGS TCU Transmission by Autel IM608
This is a 2008 Mercedes GL450. We need to swap TCU transmission control unit and program it another donor one to the vehicle using Autel MaxiIM […]
Program BMW F21 2015 AKL on Bench by Autel MaxiIM IM608
All keys lost BMW F21 2015. Autel MaxiIM IM608 Read the ISN of G-box2 on the bench. Then 2 new keys are programmed into the FEM […]
How to use Autel IM508 and XP400 Pro to do FRM Repair
Confirmed: Autel IM508 and XP400 Pro can do FRM Repair. Here we go for step-by-step procedure. Tap “Programmer”. It says “Programmer is disconnected! Please connect the programmer […]