Autel IM608 Program Keys for Ford Fiesta PATS 2008

This instruction show you guide on how to use Autel MaxiIM IM608 to program keys for Ford Fiesta PATS 2008.

Procedures:

Build connection build Autel IM608 device and Ford Fiesta,then enter Ford menu to select [Fiesta]

Select [2002-2008]

Select [Blade Key]

Select [Immobilizer(CAN)]

Select [Erase Key]

Note:All key will be earsed.At least 2 keys are required for key learning to complete,click [Yes] to continue

Turn the ignition to the ON position,click [OK]

After erase key complete,click [OK]

All known key has been erased,You must now program a minimum of two keys.

The engine will not start until you complete the following steps:

Perform the following steps to learn the ignition keys

Turn the ignition OFF

Turn the first key in the ignition to ON for 3 seconds,then remove

Would you like to add more keys?

Press [Yes] to continue,press [NO] to complete the procedures.

After finish all necessary functions,comfirm that all learned keys can start the engine.Verify that the engine continues to run for at least 5 seconds.

Learning completed.

Done!

Test the keys programmed on vehicle.