0

How to Set up BMW F, I, G Series Programming in ISTA+ (Not ISTA-P)

How-to-Set-up-BMW-F-I-G-Series-Programming-in-ISTA+-(Not-ISTA-P)-1

Problem: I had error when programming BMW F32 in ISTA-P 4.19.13 Expert Mode. Error: Vehicle programming with ISTA/P is no longer approved for the connected vehicle. Vehicle management is now only possible with ISTA 4. *Before version ISTA 4 it… Continue Reading

0

How to Activate OEM Porsche PIWIS III Developer (Engineer) Mode

enable-piwis-iii-developed-mode-1

Porsche Piwis III Development Mode (also called Engineer Mode) enables users with special functions like modification or flashing. How to enable OEM Porsche PIWIS III to Developer (Engineer) Mode on Panasonic CFAX3 Laptop? 1. For Newer Porsche Models: Go to… Continue Reading

0

Mercedes BENZ C6 Xentry diagnosis VCI DOIP &AUDIO Software Registration & Firmware Update Instructions

Mercedes BENZ C6 Xentry diagnosis VCI DOIP &AUDIO Software Registration & Firmware Update Instructions

Note: Mercedes BENZ C6 software does not support DAS(Chassis model: 169/245/211/207/221/171/231/164) and HHT. When using xentry, as long as it jumps to DAS or HHT software, the diagnosis is not supported.   epc, wis software activation steps: Login account: admin,… Continue Reading

0

How to Activate OEM Porsche PIWIS III Developer (Engineer) Mode

enable-piwis-iii-developed-mode-1

Porsche Piwis III Development Mode (also called Engineer Mode) enables users with special functions like modification or flashing. How to enable OEM Porsche PIWIS III to Developer (Engineer) Mode on Panasonic CFAX3 Laptop? 1. For Newer Porsche Models: Go to… Continue Reading

0

How to use Tech2 program the Central Control Module (CCM)

GM-Tech-2-Scanner

OBD2TOOL found a good way to solve unable to program the Central Control Module (CCM) using Vetronix Tech2. Here is the solution. Models: 1994-1996 Chevrolet Corvette The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this… Continue Reading

0

wiTech Micropod 2 Supported Vehicles

Micropod-2-Supported-Vehicles-1

Look here: Micropod 2 car list (for reference only) Tests on 1997-2018 Chrysler Dodge Jeep Fiat NOTE: On hybrid bus architecture vehicles, non-CAN bus diagnostics will be performed with Enhanced DRB III Emulator.(CS, DR 8.3L, KJ, ZB, ZH) NOTE: All… Continue Reading

0

How to Self-test with GM Tech2 CANDi module?

GM-TECH2-4

The power light on the CANdi module doesn’t come on when connected to the GM Tech2 .If that’s what you mean mine does not light up either. I think they should flash when linked to the car’s computer as that… Continue Reading

0

GM Tech2 VCI, Keypad, RS232 and CANDI Self Test Guide

Manual: How to do GM Tech2 clone scanner self test step-by-step VCI self test Keypad self test CANdi self test RS-232 self test Follow the instruction in detail… Part 1: Tech2 VCI self test Insert the GM card Connect the adapter… Continue Reading