Compared with X100 Pad2, the X100 PAD2 PRO key programmer can support VW 4th & 5th IMMO by working with the KC100 adapter (included in the package). Here’s an example showing you how to use this tool to program keys for VW CC.
Car Model: VW CC 2014
Device: Xtool X100 PAD2 PRO
Read EEPROM chip.
Prepare two keys: an original one and a blank one.
Insert the original key to your car.
Touch X100 PAD2 shortcut on the device screen to start your key programming.
Select VW under Immobilization on the menu, then “4th/5th Immobilizer system” and touch “OK” to turn on ignition switch.
Choose “4th Immobilizer system” → “VW Passat/CC (recommend) ” → “Get PIN/CS “, where codes will be extracted from EEPRO chip dump file.
Now it’s back to the previous screen. Select “Generate 48 dealers key”,
CS code is needed here. Touch “OK”.
Put the blank key as shown in the image and choose “OK”. After a few seconds, you’ll see a 48 dealer key has been generated successfully.
Take out the key and select “Match the key” on the screen, where you need to enter PIN code and the number of learning key.
Matching the key succeed! Try the programmed key and it’s working!
Now you have two keys for your VW car with the help of x100 pad2 pro key programming tool.