How to connect and configure BMW ICOM NANO
1.Check the manual. The SN serial number of the manual is the same as the SNX on the ICOM NANO label. Use the APP to […]
BMW ISTA Software
BMW Coding Support and Solutions
BMW coding for your BMW 1, 2, 3, 4, 5, 6, 7, X, I, (2004-current E, F, and G, I chassis), and BMW Mini (R5x […]
How to change FA code with E-SYS
How to change FA code BMW ICOM with E-SYS 1.Connect E-sys 2.Read FA 3.Save and change FA code 4.Code ecu(What you need to pay attention […]
How to check the Stratified charge for BMW F10/11
Testing of the performance modes of N53B30 for F10/F11 has certain specifics. The reason is the obstacle, that BMW has maximally hidden problems with the […]
Possible to work with ISTA+ and openport j2534
Question: May i have a question if somebody test already tactrix Openport 2.0 J2534 interface to make it works with BMW ISTA/D (ISTA+)? Solution: Confirm […]
How to Repair BMW F Series Power Assisted Steering Fails Trouble
The power-assisted steering fails with a warning lamp in the instrument cluster or a check control message in the Central Information Display. In some cases, […]
Possible to use Older ISTA-D with new DB2.40
Is it possible to use an Older ISTA-D for example 4.15 with an newer DB 4.20 ? its possible, you have to make a new […]
How to Set up BMW F, I, G Series Programming in ISTA+ (Not ISTA-P)
Problem: I had error when programming BMW F32 in ISTA-P 4.19.13 Expert Mode. Error: Vehicle programming with ISTA/P is no longer approved for the connected […]
How to solve the problem that BMW ICOM A2 A3 host can’t be connected?
After the BMW ICOM host is connected to the car via a 16 PIN connector, and the other side is connected to the computer via a […]
(Solved）BMW ICOM A2 A3 NEXT got blue screen on Dell laptop
Customer’s problem: We had purchased one set BMW ICOM NEXT with HDD from obd2tool, We really appreciate the faster shipment, all is well packed dhl […]