BMW ICOM ISTA/P: when starting programming dialog in ISTA/P appear the error message 94201、63031、63104 1. End the conversation 2. Disconnect the ICOM from the vehicle […]
1.Check the manual. The SN serial number of the manual is the same as the SNX on the ICOM NANO label. Use the APP to […]
BMW coding for your BMW 1, 2, 3, 4, 5, 6, 7, X, I, (2004-current E, F, and G, I chassis), and BMW Mini (R5x […]
How to change FA code BMW ICOM with E-SYS 1.Connect E-sys 2.Read FA 3.Save and change FA code 4.Code ecu(What you need to pay attention […]
Testing of the performance modes of N53B30 for F10/F11 has certain specifics. The reason is the obstacle, that BMW has maximally hidden problems with the […]
Question: May i have a question if somebody test already tactrix Openport 2.0 J2534 interface to make it works with BMW ISTA/D (ISTA+)? Solution: Confirm […]
The power-assisted steering fails with a warning lamp in the instrument cluster or a check control message in the Central Information Display. In some cases, […]
Is it possible to use an Older ISTA-D for example 4.15 with an newer DB 4.20 ? its possible, you have to make a new […]
Problem: I had error when programming BMW F32 in ISTA-P 4.19.13 Expert Mode. Error: Vehicle programming with ISTA/P is no longer approved for the connected […]
After the BMW ICOM host is connected to the car via a 16 PIN connector, and the other side is connected to the computer via a […]
Copyright © 2025 | WordPress Theme by MH Themes