How to program Peugeot 407 year 2007 remote key including pin code reading using Lonsdor K518ISE Key Programmer.
Step 1: Read Pin Code
Select Peugeot->Read Pin Code->Type 2
During the function operation, the windshield wiper brushes and the headlight illuminates which is normal
To stop wiper brush, check Help and pull out the corresponding fuse.
Turn ignition switch to ON position
Lonsdor K518 OBD2 key Programmer read vehicle information
Reading data and verifying pin
Read pin code success
Step 2: Program key
Select Peugeot->Select from vehicle->407->Immobilizer->Program key
Turn on ignition
Lonsdor K518ISE will require to enter pin to access
Turn ignition off and then turn on within 15 seconds
Program complete.
Press YES to program next key or Cancel to quit.
Step 3: Program remote control
Step to reprogram remote control:
1.Switch ignition off and remove key
2. Insert a key and switch ignition on
3. Press any button of the remote key for 10 seconds and release within 20 seconds.
4. Switch ignition off and remove key
5. For more keys, repeat step 2-4
Program Peugeot 407 remote key success.
Leave a Reply