![How-to-Solve-Foxflash-Driver-No-Voltage-Issue-3](https://forobd2tool.com/avdicommander/wp-content/uploads/sites/7/2024/07/How-to-Solve-Foxflash-Driver-No-Voltage-Issue-3-678x381.jpg)
Problem:
The Foxflash software crashes, the driver selection is greyed out, and the battery voltage is not showing. Reinstalling the software doesn’t solve the issue.
Solution:
- Start FoxFlash Manager:
- Open FoxFlash Manager and press
Enable
. - Leave FoxFlash Manager running in the background.
- Open FoxFlash Manager and press
- Run Foxflash Software:
Important Notes:
- Internet Connection: Make sure you have an active internet connection.
- Power Requirements:
- The tool must be plugged in and powered at 12V.
- If it doesn’t work, try using a different USB port.
- You can use a power adapter or an OBD cable, but the tool requires power to function.
By following these steps, you should be able to resolve the issue with the Foxflash driver and ensure that the battery voltage is displayed correctly.
Leave a Reply