I share a problem about Autel Maxisys Pro key erasure on 2000 ford focus and its solution with you.
Issue description:
I intended to replace the PCM in my vehicle. With followed all the instruction for key erasure, the MaxiSYS MS908P seemed to freeze at the 9 second make on the task bar.
Reasons:
The engine told me that I could only program new third key with having 2 already programmed keys, which meant that I couldn’t program new key if I did not have 2 working keys.
Solution:
1 Download the beta version V6.12.10 to have a test.
2 Try to program key manually. The process bar will appear for 10s after key erasure. Please ignition off and program it as followed:
Turn the ignition key to position 0
Cycle key1 in the ignition from OFF to RUN for at least 3 seconds
Cycle key2 in the ignition from OFF to RUN for at least 3 seconds.
Cycle key1 in the ignition from OFF to RUN for at least 3 seconds.
Two keys are programmed now.
I have good experience for buying Autel MS908 Pro on www.obd2tool.com website, they can offer you two years free udpate online and offer you the best service: sales@obd2tool.com
Leave a Reply