How to setup USB Flasher connection with Porsche car

May 9, 2022 Eva Porsche Trouble Repair 0

How to setup USB Flasher connection with Porsche car

1.PC-Network cable-USB Flasher-Car’s USB

(If your computer does not have a network cable interface, the connection method is: PC-USB conversion network cable interface-Network cable-USB Flasher-Car’s USB,)

How-to-setup-USB-Flasher-connection-with-Porsche-car-1

2.PC-Network cable-USB Flasher-Car’s USB

（If your computer does not have a network cable interface, the connection method is: PC-USB conversion network cable interface-Network cable-USB Flasher-Car’s USB-TYPE C）

How-to-setup-USB-Flasher-connection-with-Porsche-car-2

3.Set PC IP address

Set pc Ethernet IP address

IP address:172.16.250.250

subnet mast:255.255.0.0

How-to-setup-USB-Flasher-connection-with-Porsche-car-3

If you connect the network cable and the tool can communicate, the LED indicator of the USB Flasher will glow and blink（Very important）

How-to-setup-USB-Flasher-connection-with-Porsche-car-4

4.After the USB Flasher is connected to the Porsche car, check the PC and use the windows cmd command to ping 172.16.250.248. If the connection tool works well, you will receive a reply.

How-to-setup-USB-Flasher-connection-with-Porsche-car-5

TIPS:

The USB Flasher connected to the Porsche car interface is different from the USB conversion network cable interface, because the USB Flasher’s firmware connected to the Porsche car interface is different, it is recommended that you find a professional person to buy it.

More information about Porsche, please refer to https://www.obd2tool.com/

Related posts:

  1. How do I configure a Wired Ethernet interface
  2. How to self-test the Porsche VCI diagnostic interface
  3. Solved MB SD Connect C4 No Connection Error Code (506)
  4. JZM Porsche: the only specialist with Porsche PIWIS III

Be the first to comment

Leave a Reply

Your email address will not be published.


*