Obdstar X300 DP Plus can support the successful programming of all keys lost via OBD for Renault Logan 2018. Follow the steps below to see how it works. Another good news: if you buy X300 DP Plus now, you will receive 2 free gifts: Renault Converter plus FCA 12 + 8 adapter.
How to program Renault Logan 2018 AKL with X300 DP Plus?
* Read Info
Plug connector into OBD2 port, press
IMMO >> Renault >> Renault V30.99 >> Program keys >> Logan >> 2013- >> Type 2 >> All keys lost >> Read D Flash
Read the caution carefully, then press “Enter” to continue.
Switch ignition on.
It’ll read the info automatically…
Enter a filename to save once reading completed.
* Program Keys
Program keys >> Enter
Please ensure the internet connection is normal.
Connect the OBDII-16 and converter at the same time, otherwise make the dealer key failed!
If there is no converter, please refer to the help instructions!
Select the D Flash saved just now. And preload the key.
Do you have an original key? Enter
All existing keys of the current vehicle will be erased.
If you need to keep the currently existing key, reprogram it. Maximum 4 keys can be programmed, and the remote is automatically generate after the key programming is complete.
Press “Enter” to continue.
Switch ignition off.
Insert the key to be programmed and turn on the ignition.
Switch ignition off.
Insert the key to be programmed and turn on the ignition.
The current key is programmed successfully.
Press “Esc” to complete.
Switch ignition off.
Current number of keys: 1
Programming complete.
Test the new key, it can work normally.
Done!
This is using Obdstar Key Master DP Plus to program Renault Logan 2018 all keys lost successfully.
Leave a Reply