0

What is Yanhua Digimaster 3

Digimaster 3 is the third generation multi-functional Automobile data adjusting equipment developed by Nanning Yanhua Electronics Co.,Ltd. It bases on a high performance hardware platform which takes high-speed CPLD and the ARM11 processor as the core device. Seven inch LCD touch-screen… Continue Reading

0

Yanhua Digimaster3 error message Solution

Yanhua-Digimaster3-error-message-Solution-3

Question: tried to use Yanhua Digimaster3 to correct odometer via OBD for Mercedes Benz W211, get error message “This function is for testing by conner only, the formal issuance will be advised later.” Look at how I operate and then get… Continue Reading

0

How to do Digimaster 3 Self-Check

When the software prompts “please connect the self-test adaper to the DB15 interface to the equipment!”, please connect the self-test adapter to the DB15 interface of the equipment and click the “ok” button. DB15 is normal when 5V LED and… Continue Reading

0

How to program IC/CPU and decode audio on Digimaster 3

How-to-program-ICCPU-and-decode-audio-on-Digimaster-3-11

Yanhua Digimaster 3 works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz & BMW etc. Here share the instructions including: Files Operation – IC Programming –… Continue Reading

0

YH Digimaster 3 Nissan pathfinder odometer correction

digimaster-3-nissan-pathfinder-mileage-programming-01 (2)

Yanhua Digimaster3 is able to  adjust Nissan pathfinder mileage, here is the operate guide for you Look at the images of Nissan pathfinder option: Select “Meter system” then “Japan & Korea”. Select “Nissan”. Select “Pathfinder”. Have option: 2000, 2005-2008, 93C56, 2004,… Continue Reading

0

The solution of Digimaster 3 Insufficient Memory or File Copy Error

Digimaster3-No-Memory-Solution-1

If your Yanhua Digimaster 3 meet error like this  below: Error: Cannot copy “LCB_ALFA_147.htm”. There is not enough free disk space. Solution: 1. Turn off DigimasterIII and turn on again, when you enter Digimaster 3 system, there will be a notice… Continue Reading

0

Ford Mondeo 1,6 SCTi 160 HK odometer adjust by Digimaster 3

Digimaster 3

It’s confirmed Ford Mondeo 1,6 SCTi 160 HK odometer adjustment can be done by Digimaster 3. Go on reading for the procedure. Click on the “Meter system” button on the home page, then car series “Americas”, then “Ford”, then “Mondeo”,… Continue Reading