0

BMW ICOM ISTA/P: when starting programming dialog in ISTA/P appear the error message 94201、63031、63104

BMW-ICOM-programming-error-message-94201-63031-63104

BMW ICOM ISTA/P: when starting programming dialog in ISTA/P appear the error message 94201、63031、63104 1. End the conversation 2. Disconnect the ICOM from the vehicle 3. Disconnect the vehicle battery for 10 minutes 4. Reconnect the battery and start a… Continue Reading

0

How to connect and configure BMW ICOM NANO

How-to-connect-and-configure-BMW-ICOM-NANO-1

1.Check the manual. The SN serial number of the manual is the same as the SNX on the ICOM NANO label. Use the APP to scan the first QR code (left), check and copy the password, Only copy, no punctuation;… Continue Reading

0

BMW Coding Support and Solutions

BMW coding for your BMW 1, 2, 3, 4, 5, 6, 7, X, I, (2004-current E, F, and G, I chassis), and BMW Mini (R5x & F5x) Vehicles using BMW factory software such as INPA, NCS Expert, and BMW Diagnostic… Continue Reading

0

How to change FA code with E-SYS

How-to-change-FA-code-with-E-SYS-1

How to change FA code BMW ICOM with E-SYS 1.Connect E-sys 2.Read FA 3.Save and change FA code 4.Code ecu(What you need to pay attention to is that after you change the FA code, you need code to associate this… Continue Reading

0

How to check the Stratified charge for BMW F10/11

How-to-check-the-Stratified-charge-for-BMW-F10-F11-1

Testing of the performance modes of N53B30 for F10/F11 has certain specifics. The reason is the obstacle, that BMW has maximally hidden problems with the performance of the NOx system, locked the access to all typed of basic data which… Continue Reading

0

Possible to work with ISTA+ and openport j2534

Question: May i have a question if somebody test already tactrix Openport 2.0 J2534 interface to make it works with BMW ISTA/D (ISTA+)? Solution: Confirm it its works with ISTA/D, install bmw passthru drivers and set ediabas.ini to: STD:psssthruD You… Continue Reading

0

How to Repair BMW F Series Power Assisted Steering Fails Trouble

Repair-BMW-F-Series-Power-Assisted-Steering-Fails

The power-assisted steering fails with a warning lamp in the instrument cluster or a check control message in the Central Information Display. In some cases, the Dynamic Stability Control warning lamp (DSC) in the instrument cluster may also be illuminated.More… Continue Reading

0

Possible to use Older ISTA-D with new DB2.40

ISTA-D

Is it possible to use an Older ISTA-D for example 4.15 with an newer DB 4.20 ? its possible, you have to make a new key in registry: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold] “BMW.Rheingold.Database.CheckAppVersion.Enabled”=”False” and change product version in registry from your installed new… Continue Reading

0

How to Set up BMW F, I, G Series Programming in ISTA+ (Not ISTA-P)

How-to-Set-up-BMW-F-I-G-Series-Programming-in-ISTA+-(Not-ISTA-P)-1

Problem: I had error when programming BMW F32 in ISTA-P 4.19.13 Expert Mode. Error: Vehicle programming with ISTA/P is no longer approved for the connected vehicle. Vehicle management is now only possible with ISTA 4. *Before version ISTA 4 it… Continue Reading

0

How to solve the problem that BMW ICOM A2 A3 host can’t be connected?

After the BMW ICOM host is connected to the car via a 16 PIN connector, and the other side is connected to the computer via a network cable. Your OBD2 Scanner BMW ICOM lan and system lights will light up. As… Continue Reading