28 MarSolution to Xentry 03 2018 ONLINE Coding not working

Xentry V2019.3 & V2018.12 is the solution to Xentry 03/2018 ONLINE Coding not working. Here comes the problem description: It is Xentry 03/2018 My DAS does not ask for login when trying to access online coding, it gives me the following: Possible reasons: Its XDOS version problem! Now i’s limited by 6 months the online SCN. […]

Read More ...

16 MarHow to reset MB SD connect c4 LAN & WLAN IP address

Here is a solution…tested OK by professionals. RESET LAN & WLAN IP address as follows: On Desktop, right click to go to Personalize Control Panel-> Network and Internet-> Network and Sharing Center Network Connection-> Local Area Connection 2 Properties-> Internet Protocol MB SD Connect C4 (TCP/Pv4) Properties Use the following IP address: IP address: 172.29.127.119 Subnet […]

Read More ...

18 FebWhat MB Star multiplexer works on DoIP W222

Before entering the topic today, let’s look at the two Star diagnosis XENTRY error reports: 1) I had a problem with my Star Diagnosis Xentry 05.2013. When I connect to W222 the Diagnosis crash and I must restart the Xentry. After I start Xentry again the System shows me Error 2221-1. 2) I hooked up […]

Read More ...

06 FebHow to start a Mercedes with dead key battery

If you have a Mercedes-Benz with KEYLESS-GO, you may be wondering how to start the car if the battery in the key dies. Pressing the Engine Start/Stop button does nothing of course if your key fob battery has died. Problem Mercedes key battery has died, and you can’t start your car using the START ENGINE […]

Read More ...

26 JanBenz C6 vs Vxdiag C6 vs Xentry Connect C5 vs SDconnect C4

Look here: Mercedes Benz Star diagnostic tool: C4 vs C5 vs C6 In summary, SD connect C4 = SD C5 VXDIAG C6 = Benz C6 All can work for Mercedes-Benz diagnosis, SCN coding, flashing and programming. But with, Allscanner VXDIAG C6 and Benz C6, you have no luck with HHT for the old Mercedes and cannot access […]

Read More ...
Post Tagged with , ,

27 DecHow To Solve MB STAR C3 DAS Fault

This is our customer meet a problem when  he  decided to try and make mb star c3 work, but every time he try to communicate with the car he  get  an error message saying : Fault (1.1)-1.501.9504 Initialization of diagnosis multiplexer failed. Possible causes: The link between the diagnosis multiplexer and the diagnostic socket is […]

Read More ...

04 DecLower Benz Air Suspension with MB SD Connect C4

This is the Star Diagnostic tutorial on lower Benz cars, with MB SD Connect C4 diagnostic tool. Here takes W211 as an example. Model: MB W211 Tools used: MB SD C4 Dell d630 with Windows XP system Tutorial on lowering the car via picture: Model series selection: 211 This is the main menu Then go to Functions […]

Read More ...

05 Sepmy experience with MB star C3

I am going to keep posting my updates about doing an AAM and SRS module swap in my 01 ML 430 Sport using the Chinese clone Benz star c3 diagnosis tool. I received my C3 yesterday and the Dell D620 a day earlier to use for the C3. Replacing the hard disk with the one supplied […]

Read More ...

14 AugHow to update Xentry Connect C5 2018.7 in Two Method

Xentry Connect C5 2018.7 can update in the way of ISO Image file or ship back the hard disk to the dealer for update. This post describes how to update step by step, what to use and what should attention. 2018.7 Best Quality Benz C5 features: 1): Hardware 1 :1 Best quality 2). Works with Mercedes […]

Read More ...

26 AugHow to Retrofit Mercedes W204 Rear Lights by MB Star DAS

Here is a little tutorial on Mercedes-Benz W204 rear lights retrofit by using Benz Scan Tool MB Star diagnosis DAS software with SD Connect C4 multiplexer. Disclaimer: This is for W204 chassis only. You are at your risk. Start DAS Developer and do the usual “quick test” (all our DAS comes with developer mode) Open op […]

Read More ...