0

Gm tech 2 key fob programming

All key fobs must be programmed each time any one fob is programmed. To program,press and hold the LOCK and UNLOCK key fob buttons prompted by the Tech 2. Programming takes 15-30 minutes…

Case:
1. How to program key fobs on Chevrolet 09 by GM TECH2?
2. How to program key fobs on 2006 HHR
3. How to program 2002 SAAB 9-3 key with GM Tech2 scan tool
4. How to program key fob to 2007 Cadillac CTS-V using a GM Tech2 Tech II scanner

How to program key fobs on Chevrolet 09 by GM TECH2?

Here a procedure on how to program key fobs on Chevrolet 09 by GM TECH2 with 32MB card and CANdi module.

Purpose:
Program Key Fobs

Car model and year:
Passenger car Chevrolet 2009

Chevrolet Scan tool to use:
Tech2 GM Scan Tool with 32MB card (updated) and CANdi module

Step – by -step Procedure:

Setup the GM Tech 2 scan tool

Turn ON the ignition with the engine OFF

Power On the Scan Tool

Click “Enter”

Main Menu > F0: DIAGNOSTICS

Vehicle identification – Model Year > (9) 2009

Vehicle identification – Product Type > Passenger Car

Vehicle identification – Product Make > (1) Chevrolet

Vehicle identification – Product Line > A

Diagnostics > F1: Body

Body> F5: Remote Control Door Lock Receiver

Remote Control Door Lock Receiver > F5: Module Setup

Module Setup > F1: Program Key Fobs

Program Key Fobs > F0: Invalidate all key fobs

Instructions (Follow Instructions, if it doesn’t work repeat entire procedure)




Leave a Reply

Your email address will not be published. Required fields are marked *