Note:
1. If Autel J2534 ECU Programming work with the AUTEL MaxiSys MS908 and Autel Maxisys Pro MS908P, Which can support more cars
2. If it work alone, it can only support Support Toyota, Volvo, Honda, Jaguar and BMW, Which need have the original account and software from the factory
Why Use Autel MaxiFlash Pro J2534 With Autel Maxisys Will be better?
1.As The Autel Maxisys Pro itself has already supported ECU programming function for BENZ and BMW cars, if you need to get support for more car models, you must use J2534 device along with OEM software to implement this function. J2534 DEVICE can not only use with AUTEL MAXISYS Pro, but also can work on other OEM software.
2. Using additional OEM software, the can be used as a Pass-Thru diagnostics tool as well, which allows users to read and clear Diagnostic Trouble Codes (DTCs) and data log PIDS, collect sensor data and log generic OBDII data etc.
Pay attention When You Use The Autel Scan Tool MaxiFlash Pro J2534 :
1.When reprogramming onboard, always make sure the vehicle battery is fully charged and in good working condition.
2.During reprogramming there is a risk of having the operation failure if voltage falls below the proper operating voltage.
3.Sometimes a failed operation can be recovered, but there is a chance that failed reprogramming could ruin the control module.
4.We recommend connecting an external battery charger to the vehicle to ensure a successful operation.
Leave a Reply