SuperOBD SKP900 program 2010 Ford Focus 4D63 remote key fast

It’s newly tested OK and fast to program 2010 Ford Focus 4D63 remote key using SuperOBD SKP-900 Key Programmer! Below part will show you how to do step by step.

Steps:
Connect SKP-900 with car via 16 pin OBD port. Power on SKP-900 and choose “Immobilizer”.
http://forobd2tool.com/wp-content/uploads/2017/06/13/7-1.jpg

Choose “Ford” and “Focus”.
http://forobd2tool.com/wp-content/uploads/2017/06/13/7-2.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/7-3.jpg
Since this Ford Focus car year is 2010. So select “Immobilizer 2” option.
http://forobd2tool.com/wp-content/uploads/2017/06/13/7-4.jpg

Turn on car ignition using the old programmed key.
Choose “Add Key” function.
http://forobd2tool.com/wp-content/uploads/2017/06/13/7-5.jpg

Remove the old key. Insert the new key you want to program and turn ignition on.
http://forobd2tool.com/wp-content/uploads/2017/06/13/7-6.jpg

Now OBD2 key programmer SKP900 is programming. At first it shows the key number is 3. Then the key number turns to 4.
http://forobd2tool.com/wp-content/uploads/2017/06/13/7-7.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/7-8.jpg

hat means SKP900 key programmer at www.obd2tool.com successfully add a new 4D63 remote key for Ford Focus 2010! The whole process takes about 2 minutes only!
http://forobd2tool.com/wp-content/uploads/2017/06/13/7-9.jpg

Be the first to comment

Leave a Reply

Your email address will not be published.


*