0

Toyota TIS Techstream Program A New Key For Lexus ES330

If you lost your Lexus ES300 key,it will cost you hundreds dollars to add new one. So in this article,I will share the guide on How to programe a new key for Lexus ES330 by yourself

What you need for programming a new key for Lexus ES300?

*A laptop installed with Toyota TIS Techstream

*MINI VCI Cable for Toyota TIS Techstram ($22.9)

*A blank Lexus key

Toyota TIS Techstream Video+PDF Tutorial

Procedures of How to program new key for Lexus ES330:

Step 1: Connect MINI VCI cable to Lexus ES300 and your laptop via OBD2 port and USB port.

Run the Toyota TIS Techstream Software on your laptop.

Click the “Connect to Vehicle” at the top left corner,then the software display vehicle information.

Division:Lexus   Model:ES330   Model Year:2005  Engine:3MZ-FE

Toyota-TIS-Techstream-Program-A-New-Key-For-Lexus-ES330-1

Step 2:Click the “Next”,then software the as below.Click “Immobolizer”,the software will show as below.

Toyota-TIS-Techstream-Program-A-New-Key-For-Lexus-ES330-2

Step 3:Click “Utility”,then click “Key Registration”
Toyota-TIS-Techstream-Program-A-New-Key-For-Lexus-ES330-3

The software display information:

“Welcome to the Immobiliser key registration wizard.

This function is used to register immobiliser keys”
Toyota-TIS-Techstream-Program-A-New-Key-For-Lexus-ES330-4

Step 4:Click “Next” to continue.Toyota TIS Techstream display that (Follow below oprations):

Perform the following operation:

Remove the key from the key Cylinder.

Insert the key back into the key Cylinder.

Turn IG on.

Note:In this step the key is original master key.

Toyota-TIS-Techstream-Program-A-New-Key-For-Lexus-ES330-5

Step 5:Click “Next”.Remove the master key from the key cylinder within 20 seconds,then pess “Next”

Toyota-TIS-Techstream-Program-A-New-Key-For-Lexus-ES330-6

Step 6:Insert the key you want (new key) to program with in 10 seconds,then press next.

CAUTION:DO NOT TURN THE IGNITION SWITCH ON.

Toyota-TIS-Techstream-Program-A-New-Key-For-Lexus-ES330-7

Then wait the key registeration complete.The time remaining show on the software.

Leave a Reply

Your email address will not be published. Required fields are marked *