OBDSTAR ODO Master Test Report Correct Mileage for VW NEC24C64 PASSAT

Here share two Odo Master VW mileage adjustment test reports which have been confirmed by OBDIITOOL.CO.UK engineer.


Check if ODOMaster can adjust mileage for 2008 VW PASSAT and 2013 VW NEC24C64 or not

All need:

Device: OBDSTAR ODO Master mileage programmer

Car dashboard: 2008 VW PASSAT VDO K line, 2013 VW NEC24C64 color screen type


Record the original mileage

2008 VW PASSAT is 250000km

2013 VW NEC24C64 is 60000km

odo-master-vw-mileage-correction-3 (2)

Connect ODO Master to car dashboard

Enter ODO Master main interface


Test 1: ODO Master correct odometer for VW PASSAT 2008

Select “Diag Program”-> Cluster Calibrate” -> “VW”-> “VW V31.99”

-> “Select from vehicle”-> “Passat”-> “VDO K line”

odo-master-vw-mileage-correction-4 (2)

odo-master-vw-mileage-correction-5 (2)

odo-master-vw-mileage-correction-6 (2)

Reading mileage…

Read out the mileage is correct

odo-master-vw-mileage-correction-7 (2)

Input new mileage: 230000km

odo-master-vw-mileage-correction-8 (2)

Confirm the value just enter is right

Then start to adjust mileage

Finish adjustment

The new mileage shows on the car dashboard successfully

odo-master-vw-mileage-correction-9 (2)

Test 2: ODO Master correct odometer for VW NEC24C64 2013:

Select “Diag Program”-> “Cluster Calibrate”-> “VW”-> “VW V31.99”

-> “Select from type”-> “Identify Odometer Types”

obdstarodo-master-vw-mileage-correction-10 (2)

obdstarodo-master-vw-mileage-correction-11 (2)

Indentify the odometer type is NEC+ 24C64 (2013 Color screen)

obdstarodo-master-vw-mileage-correction-12 (2)

Then select “NEC+ 24C64”-> “Color Meter”-> “Type 2”

obdstarodo-master-vw-mileage-correction-13 (2)

obdstarodo-master-vw-mileage-correction-14 (2)

Click “Read EEPROM

obdstarodo-master-vw-mileage-correction-15 (2)

Follow the prompt to turn on ignition first. If it is a smart key, please turn off ignition and then turn it on, press [Enter] key continue

obdstarodo-master-vw-mileage-correction-16 (2)

Ensure the instrument in the black state

Reading data…

Save data with a filename

obdstarodo-master-vw-mileage-correction-17 (2)
Save EEPROM data successfully

Select “Read write mileage”

obdstarodo-master-vw-mileage-correction-18 (2)

Pay attention to the prompt “Adjustment mileage may cause the EEPROM data to be destroyed, please backup the EEPROM data first…”

We have backed up the original data in the previous steps, then go to turn on ignition

Input the new mileage: 55000km

obdstarodo-master-vw-mileage-correction-19 (2)

Confirm the value is correct

Adjust mileage successfully and the new mileage appears on the dashboard

obdstar-odo-master-vw-mileage-correction-20 (2)

Result: OBDSTAR ODO Master correct odometer for 2008 VW PASSAT VDO K line and 2013 VW NEC24C64 color screen type successfully.

Leave a Reply

Your email address will not be published. Required fields are marked *